Menu Settings - Oce CS2436 User Manual

Printer Parts (CS2436-8)
8. 2. 8.
Printer Parts > Control Panel >

Menu Settings

Menu items are as follows.
For instructions on selecting menu items, see "Menu Operations (8.2.6)."
For details on menu levels and values, see "Menu Structure (8.2.7)."
Paper Menu
Setting Item
Load Paper
Eject Paper
Chg. Paper Type (*1)
Chg. Paper Size
ManageRemainRoll
Description, Instructions
Select sheets or rolls and load the paper.
Choose this item before removing loaded paper.
Change the type of paper loaded. (See "Changing
the Type of Paper (6.2.3).")
Change the size of paper loaded. (See "Specifying
the Paper Length (6.2.4).") (See "Paper
Sizes (6.1.2).")
Choose On to print a barcode at the end of a roll
before you remove it. The printed barcode can be
used in managing the amount of roll paper left.
Choose Off if you prefer not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper
Left (6.2.11).")
Adjust the Printhead height. (See "Troubleshooting
Paper Abrasion and Blurry Images (Head
Head Height
Height) (7.1.5).")
If you print on Japanese paper (washi) or other
handmade paper that has an irregular width,
choose Loose for a higher skew detection
Skew Check Lv. threshold, or choose Off to disable skew detection.
However, if paper is loaded askew when detection
is Off, note that paper jams or Platen soiling may
occur.
Specify whether or not to cut with the standard
round-bladed cutter.
Choose Automatic to have the roll cut
automatically after printing. If you choose Manual,
Cutting Mode the paper will not be cut after printing. Instead, a
line will be printed at the cut position.
Choose Eject if you prefer not to have documents
dropped immediately after printing, as when
waiting for ink to dry.
Choose the cutting speed. If you use adhesive
Cut Speed paper, choosing Slow helps prevent adhesive from
sticking to the cutter and keeps the cutter sharp.
Trim Edge First
If a roll is loaded, the end of the paper will be cut.
If you choose On, a line will be printed at the cut
position when paper cutting is selected. This option
reduces the amount of debris given off after
cutting. It also helps prevent adhesive from sticking
CutDustReduct.
to the cutter and keeps the cutter sharp if you use
adhesive paper. (See "Reducing Dust from Cutting
Rolls (6.2.15).")
Specify the level of suction that holds paper against
the Platen. (See "Adjusting the Vacuum Strength
VacuumStrngth
(VacuumStrngth) (7.2.7).")