Dis-/assembly
1 Replacing the IP PBA
Disassembly
Before you disassemble the IP PBA:
1
Use (*4* Function 18 PRM_PRNT) to print out all registration data (one
I
touch dialing, speed dialing, user data list, etc; these are important if the ma-
chine is equipped with the fax PBA).
Take notes of the settings in user mode and others.
I
*4* Function 18 is only available if the fax PBA has been installed.
Note:
Remove the platen, and remove the CCD cover.
2
Return the mirror support No. 1 to the home position.
3
Remove the four screws (2), and move the IP cover (1) to the front. Then, re-
4
move the PBA, first lifting the rear of the PBA.
2
2
ed.1
2
1
2
3
08 Image processing 401