Lcd Pba And Cpu Pba - Oce 3121 Technical & Service Manual

3 LCD PBA and CPU PBA

Removing the LCD PBA and the CPU PBA
Remove the inside, front cover (See Miscellaneous Page ....)
1
Remove the magnetic latch plate (1 screw) of the RDF: at the front of the plat-
2
en.
Remove the RDF and the sorter power supply unit (top left).
3
Remove 2 x black and 2 x silver coloured screws, to remove the control panel
4
from the machine.
Remove the RS 232 connector from the support (2 screws).
5
Disconnect the 2 small connectors from the PBA on the operating panel (2 pur-
6
ple lead connectors).
Disconnect the connector (1), and remove the six screws (2). Then, remove the
7
control panel support (3).
3
2
Remove the four screws and the three flat cables. Then, remove the LCD PBA
8
(4).
Remove the two screws and the switch PBA (5). Then, remove the four screws
9
and the two flat cables, and remove the CPU PBA (6).
5
ed.1
2
2
6 4
1
2
22 Power & Control 403