Power Supply Pba - Oce 3121 Technical & Service Manual

2 Power supply PBA

Replacing the Power Supply PBA
Remove the DC control PBA.
1
Remove the two screws, and remove the connector support (1).
2
Remove the two screws (3), and disconnect all connectors; then, remove the
3
composite power supply PCB.
3
3
Replace the composite power supply with the actions in reverse order.
4
After replacement:
5
Enter the values, which are recorded on the label attached to the composite
I
power supply PBA, in (*3* Adjust 03).
Execute (*4* Function 03 Auto Shading Start).
I
Execute (*4* Function 04 PD Print).
I
Execute (*4* Function 05 200 PWM Print).
I
Execute (*4* Function 04 600 PWM Print).
I
402 TSM Océ 3121
3 2 3
1
Dis-/assembly