Adjust 06 Adjusting The Ae/Fixing Assembly Settings - Oce 3121 Technical & Service Manual

*3* ADJUST 06 Adjusting the AE/Fixing Assembly Settings

Item Description
AE-SLOP When copying in AE mode with priority on
image quality, some types of originals generate
light images. If such is the case, use this mode to
adjust the copy image density.
FIXER-RES Use it to enter the resistance of the fixing assem-
IST bly.
If you have replaced the fixing assembly, enter
I
the value recorded on the label attached to the
fixing assembly.
FILM Use it to enter the film thickness (fixing tempera-
LANK ture control value).
If you have replaced the fixing assembly, enter
I
the value recorded on the label attached to the
fixing assembly, thereby setting the fixing tem-
perature control value.
ABC_TBL Use it to decrease the setting if the text density is
too low (light image) when executing AE mode
with priority on speed.
AE_LIGHT Use it to decrease the setting if the background of
the original is too conspicuous when using AE
mode with priority on image quality mode.
AE_DARK Use it to increase the setting if the text density is
too low (light image) when executing AE mode
with priority on image quality.
42 TSM Océ 3121
Resistance
to enter
Settings Remarks
1~19
0~4 Enter a value
higher then the
recorded value
by 1 to 2 if
shiny lines
(vertical) occur
on solid black
copiers.
0~9
0~40
0~40
SDS Description