Function 07 Registering The Multifeeder Paper Width - Oce 3121 Technical & Service Manual

*4* FUNCTION 07 Registering the Multifeeder Paper Width

Item
Multifeeder
paper width basic
value registration
50 TSM Océ 3121
Description
1) Place an A6R sheet* in the multifeeder, and adjust the
side guide to A6R.
*A6 is what you obtain folding A4 into four, with its width
I
being 105 mm.
2) Check the screen to make sure that the VR output is indi-
cated under 'AD=xxx' as soon as the side guide is adjusted
to A6R.
Then, press 'MF-A6R' to highlight, and press the OK key.
I
The value will be stored under 'MF-A6R'.
I
3) Likewise, place and A4R sheet in the multifeeder, and
adjust the side guide to A4R.
4) Check to make sure that the AD value has been indicated;
then, press 'A4R' to highlight, and press the OK key.
The value will be stored under 'A4R'.
I
5) Then, place an A4 sheet of paper in the multifeeder, and
adjust the side guide to A4.
6) Check to make sure that the AD value has been indicated;
then, press 'A4;' to highlight, and press the OK key.
The value will be stored under 'A4'.
I
7) Press the Reset key twice to end service mode.
8) Turn off and then on the main power switch.
Refer-
ence page
See page
2-15
SDS Description