Adjusting The Switch (Ms1) - Oce 3121 Technical & Service Manual

11 Adjusting the Switch (MS1)

.Remove the cover.
1
Open and close the RDF. Adjust the retaining plate (2) until switch MS1 (1)
2
switches on and off when the lower edge of the RDF is between 10 and 100
mm from the platen.
(1) RDF switch (MS1), (2) Retaining plate
Right Hinge
10~100 mm
ed.1
(1)
(2)
RDF
Copier
10 RDF 317