Test Print - Oce Eco Solvent CS9060 User Manual

4.4 TEST PRINT

4.4.1 Overview and functions of the test prints
Testplot Function
Nozzle Check To check the head nozzles.
Mode print To check the print conditions.
Setup print To check the current setup of the printer.
Palette Print To compare output colours with printing colours.
4.4.2 Performing a test print
Step 1 : Verify that the printer has been switched ON and that media more than A3 size has been loaded.
See "Installing roll media" and "Loading roll media"
Step 2 : Verify that the printer is in Normal mode.
Step 3 : Press the [Menu] key on the operation panel.
Result:
•
The first submenu of the Setup menu is displayed.
•
The operation panel displays "Menu 1: Setup>".
•
The printer is in Menu mode.
Step 4 : Press the [-] key on the operation panel.
Result: The operation panel displays " Menu 2: Test Print>"
User's Guide Océ CS9060 printer
Chapter 4 : Handling the printer
Action to be performed
when needed
Perform a head cleaning.
Change print conditions.
Change setup.
Check colour mode
67 AP-75770 – Rev 1.1 -19/11/2007,