How To Power On And Off - Oce arizona 1240 GT User Manual

How to Power ON and Off

Introduction
It is critical for the printer to remain powered ON at all times. Power is required in periods of
inactivity so the printer can perform automatic functions to maintain its operating state. If these
functions do not take place, damage to critical components can occur. However, it may be
necessary on occasion to cycle power on the printer or to recover from a power outage.
How to Power ON and Off
Procedure
1. Ensure that the AC power plug is properly seated.
2. Turn the AC power switch to the On position.
[31] AC Power Switch
3. Turn on the power of the Control Station LCD monitor, if necessary.
NOTE
During the boot-up procedure, the printer software is automatically started. The
software displays a splash screen.
The splash screen will show initialization messages and then the Print Job Control
module screen appears. The initialization is complete when the top left panel of the
display shows "Ready". Your printer is now ready for use.
How to Power Off
1. Turn OFF the UV lamps and wait for the lamps to cool down (the lamp fans will stop once the
lamps have cooled down).
2. Click the Shutdown icon in the Tools and Utilities tab.
3. Turn the AC power switch to the OFF position
IMPORTANT
Do not leave the printer powered OFF for longer than 30 minutes.
Power is required in periods of inactivity so the printer can perform automatic
functions to maintain its operating state. If these functions do not take place, damage
to critical components can occur. If the printer needs to be shut down for an extended
period of time please contact your local service representative so that the ink can be
properly flushed from the system.
Océ Arizona 1200 Series
Chapter 5 - How to Operate Your Océ Arizona Printer
How to Power ON and Off
59