Exporting A Flight Plan To An Sd Card - Garmin G1000 NXi Reference Manual

5) Turn either FMS Knob to highlight an empty or existing flight plan.
6) Press the Import Softkey; or press the MENU Key, select "Import Flight
Plan", and press the ENT Key.
If an empty slot is selected, a list of the available flight plans on the SD
card will be displayed.
Or:
If an existing flight plan is selected, an "Overwrite existing flight plan?
OK or CANCEL" prompt is displayed. Press the ENT Key to choose to
overwrite the selected flight plan and see the list of available flight
plans on the SD card. If overwriting the existing flight plan is not
desired, select "CANCEL" using the FMS Knob, press the
ENT Key, select another flight plan slot, and press the Import Softkey
again.
7) Turn the small FMS Knob to highlight the desired flight plan for importing.
8) Press the ENT Key to initiate the import.
9) Press the ENT Key again to confirm the import.

EXPORTING A FLIGHT PLAN TO AN SD CARD

1) Insert the SD card into the top card slot on the MFD.
2) Press the FPL Key to display the 'FPL - Active Flight Plan' Page on the MFD.
3) Turn the small FMS Knob to select the 'FPL - Flight Plan Catalog' Page.
4) Press the FMS Knob to activate the cursor.
5) Turn the large FMS Knob to highlight the flight plan to be exported.
6) Press the Export Softkey; or press the MENU Key, select "Export Flight
Plan".
7) If desired, change the name for the exported file by turning the large FMS
Knob to the left to highlight the name, then use the small and large FMS
knobs to enter the new name, and press the ENT Key.
8) Press the ENT Key to initiate the export.
9) Press the ENT Key to confirm the export.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
71