Entering/Designating Or Modifying A Waypoint Altitude Constraint To Be Used For Vertical Guidance; Removing/Undesignating An Altitude Constraint; Reverting A Manually Entered Altitude Constraint Back To; The Navigation Database Value - Garmin G1000 NXi Reference Manual

ENTERING/DESIGNATING OR MODIFYING A WAYPOINT ALTITUDE
CONSTRAINT TO BE USED FOR VERTICAL GUIDANCE
FPL
1) Press the
Page.
FMS
2) Push the
constraint.
3) Enter an altitude constraint value using the
as a flight level, turn the small
or clockwise past 9 on the first character, and the system automatically
changes to show units of Flight Level. Turn the large
to highlight the first zero and enter the three digit flight level.
ENT
4) Press the
waypoint is an airport without a runway selected, an additional choice is
displayed. Turn the small
ENT
the Key to accept the altitude.

REMOVING/UNDESIGNATING AN ALTITUDE CONSTRAINT

FPL
1) Press the
Page.
FMS
2) Push the
constraint.
CLR
3) Press the
displayed.
4) Select 'OK' and press the
REVERTING A MANUALLY ENTERED ALTITUDE CONSTRAINT BACK TO THE
NAVIGATION DATABASE VALUE
FPL
1) Press the
Page.
FMS
2) Push the
constraint.
CLR
3) Press the
nnnnnFT?' confirmation window is displayed.
190-02178-02 Rev. A
Key on the MFD to display the 'FPL – Active Flight Plan'
Knob, and turn to highlight the desired waypoint altitude
FMS
Key to accept the altitude constraint; if the selected
FMS
Knob to choose 'MSL' or 'AGL', and press
Key on the MFD to display the 'FPL – Active Flight Plan'
Knob, and turn to highlight the desired waypoint altitude
Key. A 'Remove VNV altitude?' confirmation window is
ENT
Key.
Key on the MFD to display the 'FPL – Active Flight Plan'
Knob, and turn to highlight the desired waypoint altitude
Key. A 'Remove or Revert to published VNV altitude of
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
FMS
Knobs. To enter altitudes
Knob counter-clockwise past zero
FMS
Knob clockwise
79