Creating User Waypoints From Map Pages - Garmin G1000 NXi Reference Manual

Flight Management
9) If desired, change the storage method of the waypoint to temporary or
normal by moving the cursor to "Temporary" and pressing the
check or uncheck the box.
10) Turn the large
ENT
Key. The 'FPL – Active Flight Plan' Page is displayed with the new user
waypoint added to the flight plan.

CREATING USER WAYPOINTS FROM MAP PAGES

1) Push the Joystick to activate the panning function and pan to the map
location of the desired user waypoint.
2) Press the ENT Key. The 'WPT - User WPT Information' Page is displayed
with the captured position.
3) Enter a user waypoint name (up to six characters).
4) Press the ENT Key to accept the selected name.
5) If desired, define the type and location of the waypoint in one of the
following ways:
Select "RAD/RAD" using the small FMS Knob, press the ENT Key,
and enter the two reference waypoint identifiers and radials into the
'Reference Waypoints' Window using the FMS Knobs.
Or:
Select "RAD/DIS" using the small FMS Knob, press the ENT Key, and
enter the reference waypoint identifier, the radial, and the distance into
the 'Reference Waypoints' Window using the FMS Knobs.
Or:
Select "LAT/LON" using the small FMS Knob, press the ENT Key, and
enter the latitude and longitude into the 'Information' Window using
the FMS Knobs.
6) Press the ENT Key to accept the new waypoint.
7) If desired, change the storage method of the waypoint to temporary or
normal by moving the cursor to "Temporary" and pressing the ENT Key to
check or uncheck the box.
8) Press the FMS Knob to remove the flashing cursor.
9) Press the Go Back Softkey to return to the map page.
50
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
FMS
Knob to highlight 'Load WPT to FPL' and press the
ENT
Key to
190-02178-02 Rev. A