Electronic Checklists - Garmin G1000 NXi Reference Manual

Additional Features
4) If necessary, turn the large FMS Knob to select 'YES'.
5) Press the ENT Key to remove the device from the list of paired devices.

ELECTRONIC CHECKLISTS

NOTE: The checklists presented here are for example only and may not reflect
checklists actually available for the Cessna NAV III Aircraft. This material is
not intended to replace the checklist information presented in the AFM or
the Pilot Safety and Warning Supplements document.
NOTE: Garmin is not responsible for the content of checklists. Cessna
NAV III Aircraft checklists are created, modified, and updated by the aircraft
manufacturer.
The optional checklist functions are displayed on two levels of softkeys that are
available on any MFD page.
The MFD is able to display optional electronic checklists which allow a pilot to
quickly find the proper procedure on the ground and during each phase of flight.
The system accesses the checklists from an SD card inserted into the bezel slot. If
the SD card contains an invalid checklist file or no checklist, the Power-up Page
messages display 'Checklist File: Invalid' or 'Checklist File: N/A' (not available) and the
Checklist Softkey is not available.
Accessing and navigating checklists:
1) From any page on the MFD, press the Checklist Softkey or turn the large
FMS Knob to select the Checklist Page.
2) Turn the large FMS Knob to select the 'Group' field.
3) Turn the small FMS Knob to select the desired procedure and press the ENT
Key.
4) Turn the large FMS Knob to select the 'Checklist' field.
5) Turn the FMS Knob to select the desired checklist and press the ENT Key.
The selected checklist item is indicated with white text surrounded by a white
box.
158
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A