Garmin G1000 NXi Reference Manual page 138

Hazard Avoidance
3) Press the Datalink Softkey.
4) When finished, press the Back Softkey.
Cell Movement (SiriusXM)
Displaying Cell Movement information on the Weather Data Link
(XM) Page:
1) Select the 'Map - Weather Data Link (XM)' Page using the FMS Knob.
2) Press the Cell MOV Softkey.
Setting up the system to display Cell Movement with NEXRAD on
navigation maps:
1) Use the FMS Knob to select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) With 'Map Settings' highlighted, press the ENT Key.
4) Turn the small FMS Knob to highlight 'Weather' and press the ENT Key.
5) Turn the large FMS Knob to 'On' or 'Off' for the Cell Movement menu
option. When set to 'On', Cell Movement is enabled/disabled with the
NEXRAD weather product on navigation maps. When set to 'Off', Cell
Movement is not displayed on navigation maps.
6) When finished, push the FMS Knob or CLR Key to remove the menu.
Infrared Satellite (Garmin Connext)
Displaying Infrared Satellite information:
1) Select the 'Map - Weather Data Link (CNXT)' Page.
2) Press the IR SAT Softkey.
SIGMETs and AIRMETs
Displaying SIGMETs and AIRMETs:
1) Select the 'Map- Weather Data Link (XM or CNXT or FIS-B)' Page.
2) Press the SIG/AIR Softkey.
3) To view the text of the SIGMET or AIRMET, press the Joystick and move the
Map Pointer over the icon.
4) Press the ENT key.
112
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A