Garmin G1000 NXi Reference Manual page 41

Tachometer Indicator
1
(RPM)
Fuel Flow Indicator
2
(FFLOW GPH)
Oil Pressure Indicator
3
(OIL PSI)
Oil Temperature Indicator
4
(OIL °F)
Exhaust Gas Temperature
5
Indicator
(EGT)
Vacuum Pressure Indicator
6
(VAC)
Calculated Fuel Used
7
(GAL Used)
Calculated Fuel Remaining
8
(GAL REM)
Fuel Quantity Indicator
9
(Fuel QTY GAL)
Engine Hour Indicator
10
(ENG HRS)
Voltmeter
11
(M, E Bus Volts)
Ammeter
12
(M, S Battery Amps)
190-02178-02 Rev. A
Displays engine tachometer in revolutions per minute (RPM)
Displays fuel flow in gallons per hour (gph)
Displays oil pressure in pounds per square inch (psi)
Displays oil temperature in degrees Fahrenheit (°F)
Displays exhaust gas temperature in degrees
Fahrenheit (°F)
Displays standby vacuum pump pressure)
Displays fuel used in gallons, based on fuel flow
Displays the totalizer-based fuel remaining in gallons,
adjusted using the DEC FUEL and INC FUEL Softkeys
Displays the amount of fuel in gallons (gal) for each
side of a standard fuel tank
Displays a numeric readout for the time in hours (hrs)
the engine has been in service
Displays the main and essential bus voltages
Displays the main and standby battery load in amperes
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Engine Indication System
15