Selecting Any Waypoint As A Direct-To Destination; Selecting A Nearby Airport As A Direct-To Destination; Selecting A Manual Direct-To Course; Reselecting The Direct Course From The Current Position - Garmin G1000 NXi Reference Manual

SELECTING ANY WAYPOINT AS A DIRECT-TO DESTINATION

1) Select the page or window containing the desired waypoint type and select
the desired waypoint.
2) Press the Direct-to Key to display the 'Direct To' Window with the selected
waypoint as the direct-to destination.
3) Press the ENT Key. The cursor is now displayed on 'Activate?'.
4) Press ENT again to activate the direct-to.

SELECTING A NEARBY AIRPORT AS A DIRECT-TO DESTINATION

1) Press the Nearest Softkey on the PFD; or turn the FMS Knob to display the
'NRST - Nearest Airports 'Page on the MFD and press the FMS Knob.
2) Use the FMS Knob to select the desired airport (the nearest one is already
selected).
3) Press the Direct-to Key.
4) Press the ENT Key. The cursor is now displayed on 'Activate?'.
5) Press the ENT Key again to activate the direct-to.

SELECTING A MANUAL DIRECT-TO COURSE

1) Press the Direct-to Key. The 'Direct To' Window is displayed.
2) Turn the large FMS Knob to highlight the 'CRS' or 'Course' Field.
3) Use the small FMS Knob to enter the desired course.
4) Press the ENT Key. The cursor is now displayed on 'Activate?'.
5) Press the ENT Key again to activate the direct-to.

RESELECTING THE DIRECT COURSE FROM THE CURRENT POSITION

1) Press the Direct-to Key. The 'Direct To' Window is displayed.
2) Press the ENT Key. The cursor is now displayed on 'Activate?'.
3) Press the ENT Key again to activate the direct-to.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
55