Creating And Adding User Waypoints To The Active Flight; Plan Using The Map Pointer; Adding A Waypoint To An Existing Stored Flight Plan; Removing An Individual Waypoint From The Active Flight Plan - Garmin G1000 NXi Reference Manual

Flight Management
CREATING AND ADDING USER WAYPOINTS TO THE ACTIVE FLIGHT PLAN
USING THE MAP POINTER
1) Press the FPL Key
2) Press the FMS Knob on the MFD to activate the cursor.
3) Select the point in the flight plan to add the new waypoint.
4) Push the Joystick on the MFD to activate the panning function on the 'FPL
- Active Flight Plan' Page and pan to the map location of the desired user
waypoint.
5) Press the LD WPT Softkey; or press the MENU Key, select 'Load Waypoint', and press
the ENT Key. The user waypoint is created with a name of USRxxx (using the next
available in sequence) and is added to the active flight plan.

ADDING A WAYPOINT TO AN EXISTING STORED FLIGHT PLAN

1) On the 'FPL - Flight Plan Catalog' Page, press the FMS Knob to activate the
cursor.
2) Highlight the desired flight plan.
3) Press the EDIT Softkey; or press the ENT Key, turn the large FMS Knob
clockwise to select "EDIT" and press the ENT Key. The 'FPL - Stored Flight
Plan' Page is displayed.
4) Select the point in the flight plan to add the new waypoint. The new
waypoint is placed directly in front of the highlighted waypoint.
5) Turn the small FMS Knob to display the 'Waypoint Information' Window.
(Turning it clockwise displays a blank 'Waypoint Information' Window,
turning it counter-clockwise displays the 'Waypoint Information' Window
with a waypoint selection submenu allowing selection of active flight plan,
nearest, recent, user, or airway waypoints).
6) Enter the identifier, facility, or city name of the waypoint or select a
waypoint from the submenu of waypoints and press the ENT Key. The new
waypoint now exists in the flight plan.

REMOVING AN INDIVIDUAL WAYPOINT FROM THE ACTIVE FLIGHT PLAN

1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the waypoint to be removed.
60
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A