Activating A Vertical Navigation Direct-To; Removing A Vnv Direct-To Altitude Constraint; Enabling The Vertical Situation Display; Disabling The Vertical Situation Display - Garmin G1000 NXi Reference Manual

ACTIVATING A VERTICAL NAVIGATION DIRECT-TO

FPL
1) Press the
Page.
FMS
2) Push the
highlight the desired waypoint.
NOTE:
The selected waypoint must have a designated altitude constraint
(cyan number) to be used. If not, the first waypoint in the flight plan with a
designated altitude constraint is selected.
VNV
3) Press the
Direct-To', and press the
NNNNNFT at XXXXXX?' confirmation window is displayed.
ENT
4) Press the
the selected waypoint.
FMS
5) Push the

REMOVING A VNV DIRECT-TO ALTITUDE CONSTRAINT

1) Press the ¯ Key to display the 'Direct To' Window.
MENU
2) Press the
3) With 'Clear Vertical Constraints' highlighted, press the

ENABLING THE VERTICAL SITUATION DISPLAY

1) Select the 'Map - Navigation Map' Page.
2) Press the Map Opt Softkey.
3) Press the Inset Softkey.
4) Press the VSD Softkey to enable the Vertical Situation Display.
5) Press the VSD Mode softkey to choose between Auto, FPL, or TRK.

DISABLING THE VERTICAL SITUATION DISPLAY

1) Select the 'Map - Navigation Map' Page.
2) Press the Map Opt Softkey.
190-02178-02 Rev. A
Key for the MFD to display the 'FPL – Active Flight Plan'
Knob to activate the cursor and turn the large
¯ Softkey; or press the
ENT
Key. An 'Activate vertical Direct-to to:
Key. Vertical guidance begins to the altitude constraint for
Knob to remove the flashing cursor.
Key.
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
MENU
Key, highlight 'VNV
ENT
Key.
FMS
Knob to
81