Loading An Approach Procedure Into A Stored Flight Plan - Garmin G1000 NXi Reference Manual

Flight Management
6) Turn the FMS Knob to highlight the desired transition, and press the ENT
Key.
7) Minimums
a) To set 'Minimums', turn the small FMS Knob to select 'BARO' or 'TEMP
COMP' and press the ENT Key. Turn the small FMS Knob to select the
altitude, and press the ENT Key.
b) If 'TEMP COMP' was selected, the cursor moves to the temperature
field. Turn the small FMS Knob to select the temperature, and press the
ENT Key.
Or:
To skip setting minimums, press the ENT Key. The 'Load?' field is
highlighted.
8) Press the ENT Key with 'Load?' highlighted to load the approach
procedure; or turn the large FMS Knob to highlight 'Activate?' and press
the ENT Key to load and activate the approach procedure.
When GPS is not approved for the selected final approach course, the
message '- NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach?' is displayed. With 'Yes' highlighted, press the ENT Key.
When a visual approach is selected, the message 'Obstacle clearance is not
provided for visual approaches' is displayed. With 'OK' highlighted, press
the ENT Key.

LOADING AN APPROACH PROCEDURE INTO A STORED FLIGHT PLAN

1) Select a stored flight plan from the 'FPL - Flight Plan Catalog' Page.
2) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan', and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
3) Press the LD APR Softkey; or press the MENU Key, select "Load
Approach", and press the ENT Key. The 'PROC - Approach Loading' Page is
displayed.
4) Select the airport and approach:
a) Use the FMS Knob to select an airport and press the ENT Key.
b) Select an approach from the list and press the ENT Key.
Or:
90
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A