Garmin G1000 NXi Reference Manual page 239

Level 1 Level 2
DME
Bearing 1
Bearing 2
ALT Units
STD Baro
OBS
CDI
DME
XPDR
Standby
On
ALT
VFR
190-02178-02 Rev. A
Level 3
Option 1
Headwind/Tailwind and crosswind arrows with numeric
components.
Option 2
Total wind direction arrow and numeric speed.
Option 3
Total wind direction arrow with digital numeric direction
and speed.
Displays 'DME Information' Window (optional).
Cycles the Bearing 1 Information Window through NAV1,
NAV2, GPS/waypoint identifier and GPS-derived distance
information, ADF/frequency, and Off.
Cycles the Bearing 2 Information Window through NAV1,
NAV2, GPS/waypoint identifier and GPS-derived distance
information, ADF/frequency, and Off.
Displays softkeys to select altitude unit parameters.
Meters When enabled, displays altimeter in meters.
IN
Press to display the BARO setting as inches of mercury.
HPA
Press to display the BARO setting as hectopacals.
Sets barometric pressure to 29.92 in Hg (1013 hPa if
metric units are selected).
Selects OBS mode on the CDI when navigating by GPS
(only available with active leg). When OBS is on, the
softkey annunciator is green.
Cycles through FMS, NAV1, and NAV2 navigation modes
on the CDI.
Displays the 'DME Tuning' Window, allowing tuning and
selection of the DME (optional).
Displays the transponder selection softkeys.
Selects transponder Standby Mode (transponder does not
reply to any interrogations).
Activates transponder (transponder replies to identification
interrogations).
Altitude Reporting Mode (transponder replies to
identification and altitude interrogations).
Automatically enters the VFR code (1200 in the U.S.A.
only).
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Description
Appendix
213