Connext Bluetooth ® Management - Garmin G1000 NXi Reference Manual

Additional Features
3) Turn the large
Airport field.
FMS
4) Use the
Selecting origin/destination runway
1) Select the FPL - SurfaceWatch Setup Page.
FMS
2) Press the
3) Turn the large
Runway field.
4) Turn the small
Runway. As the small
runway or landing runway is also displayed.
Selecting required takeoff/landing distance
1) Select the FPL - SurfaceWatch Setup Page.
FMS
2) Press the
3) Turn the large
REQD Landing DIS field.
FMS
4) Use the
pressing the
distance, the Runway Length field will turn amber if an insufficient runway
length exists.
CONNEXT BLUETOOTH
The Connext Setup Page allows for setting up the installed optional Flight Stream
device for a Bluetooth connection between the system and a mobile device running the
™
Garmin Pilot application.
The mobile device must be 'paired' with the system in order to use the various
functions. Pairing is accomplished by first placing the system in pairing mode by
displaying the Connext Setup Page. The system is 'discoverable' whenever this page is
displayed. The pairing operation is completed from the mobile device and the Garmin
Pilot application. See the device Bluetooth pairing instructions and the connection
instructions in the Garmin Pilot application.
156
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
FMS
Knob if necessary to highlight the Origin or Destination
Knobs to input the desired Origin or Destination Airport.
Knob momentarily to activate the flashing cursor.
FMS
Knob if necessary to highlight the Runway or Landing
FMS
Knob to select the desired available Runway or Landing
FMS
Knob is turned, the preview of the selected
Knob momentarily to activate the flashing cursor.
FMS
Knob if necessary to highlight the REQD Takeoff DIS or
Knobs to enter the required takeoff or landing distance. Upon
FMS
Knob and committing the required takeoff or landing
MANAGEMENT
®
190-02178-02 Rev. A