Electronic Stability And Protection (Esp ) (Optional) - Garmin G1000 NXi Reference Manual

4) Press the SAT - or SAT +, to adjust display saturation in five percent
increments from 0 to 100%.
5) If desired, return the display to the default settings by pressing the Reset
Softkey.
6) Press the Back Softkey to return to the previous softkey level.
Display Selection
Pressing the Hide Map Softkey removes the map and displays video on the full
screen. The softkey label changes to grey with black characters. Pressing the Hide
Map Softkey again restores the map view and the small video image. The softkey label
returns to white characters on a black background.
Zoom/Range
Pressing the Zoom + or Zoom - Softkeys increases or decreases video display
magnification between 1x and 10x.
The RANGE Knob can be used to increase or decrease the range setting on the
map display or zoom in and out on the video display. While in the Split-Screen mode,
pressing the Map Actv or Vid Actv Softkey determines which display the RANGE
Knob adjusts. Pressing the softkey to display Map Actv allows the RANGE Knob to
control the range setting of the map display. Pressing the softkey to display Vid Actv
allows the RANGE Knob to control the zoom setting of the video display.
Input Selection
While on the Aux - Video Page, press the Input Softkey to select the EVS or Aux
video source.
NOTE: Images provided on the Aux-Video page are for supplemental use
only.
ELECTRONIC STABILITY AND PROTECTION (ESP
NOTE:
ESP is designed to be a safety enhancement feature. ESP is not a full
authority, envelope protection system.
NOTE:
ESP is designed to discourage exceeding the normal flight envelope.
It is not designed or capable of performing the necessary recovery procedures
required due to encounters with adverse flight conditions and environments.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Additional Features
™ ) (OPTIONAL)
161