Flight Instruments; Enabling/Disabling Or Modifying Individual Vspeed Reference Bugs; Enabling/Disabling Vspeed Reference Bugs As A Group Or Restoring; All Default Settings - Garmin G1000 NXi Reference Manual

ENABLING/DISABLING OR MODIFYING INDIVIDUAL VSPEED REFERENCE
BUGS
1)
Press the TMR/REF Softkey.
2)
Turn the large FMS Knob to highlight the desired Vspeed value.
3)
Use the small FMS Knob to change the Vspeed in 1-kt increments (when a
speed has been changed from a default value, an asterisk appears next to
the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the On/Off field
5)
Turn the small FMS Knob clockwise to 'On' or counterclockwise to 'Off'.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
ENABLING/DISABLING VSPEED REFERENCE BUGS AS A GROUP OR
RESTORING ALL DEFAULT SETTINGS
1)
Press the TMR/REF Softkey.
2)
Press the MENU Key.
3)
Turn the FMS Knob to scroll as needed to highlight 'All References On', 'All
References Off' or 'Restore Defaults'.
4)
Press the ENT Key.
5) To remove the References Window, press the CLR Key or the TMR/REF
Softkey.

SELECTING THE ALTITUDE DISPLAY UNITS

1) Turn the FMS Knobs to select the 'Aux - System Setup 1' Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the 'ALT, VS' datafield in the 'Display
Units' Window.
4) Turn the small FMS Knob to highlight either 'Feet(FT,FPM)' or
'Meters(MT,MPS)' and press the ENT Key. This setting affects altitude
displays system-wide, in addition to those shown on the PFD.
190-02178-02 Rev. A

FLIGHT INSTRUMENTS

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Instruments
1