Hazard Avoidance; Customizing The Hazard Displays On The 'Map - Navigation Map' Page; Stormscope ® (Optional) - Garmin G1000 NXi Reference Manual

Customizing the Hazard Displays on the 'Map - Navigation Map' Page

1) With the 'Map - Navigation Map' Page displayed, press the MENU Key to
display the 'Map - Navigation Map' Page Menu . The cursor flashes on the
'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed. Turn the small
FMS Knob to select 'Weather' to customize the display of weather features.
Select 'Traffic' to customize the display of traffic.
3) Press the small FMS Knob to return to the "Map - Navigation Map' Page.
STORMSCOPE (OPTIONAL)
®
WARNING: Do not rely on information from the lightning detection system
display as the sole basis for hazardous weather avoidance. Range limitations
and interference may cause the system to display inaccurate or incomplete
information. Refer to documentation from the lightning detection system
manufacturer for detailed information about the system.
NOTE: Stormscope lightning information cannot be displayed simultaneously
on the same map as lightning information from data link lightning sources.
Displaying Stormscope Lightning Data on the 'Map - Navigation Map'
Page
1) Select the Map Opt Softkey.
2) Select the STRMSCP Softkey.
Enabling/Disabling Stormscope Information on PFD Maps
1) On the PFD, press the Map/HSI Softkey.
2) Press the Lightning Softkey.
3) Press the STRMSCP Softkey to enable Stormscope lightning information, or
press the LTNG Off Softkey to disable Stormscope lightning information.
190-02178-02 Rev. A

HAZARD AVOIDANCE

Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Hazard Avoidance
99