Garmin G1000 NXi Reference Manual page 148

Hazard Avoidance
Changing Traffic System Modes on the 'Map - Traffic Map' Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the 'Map - Traffic Map' Page.
3) Press the Operate or TAS OPER or Normal Softkey to begin displaying
traffic. 'OPERATING' is displayed in the Traffic mode field.
4) Press the Standby or TAS STBY Softkey to place the system in the
Standby mode. 'STANDBY' is displayed in the Traffic mode field.
Changing the Altitude Range
1) On the 'Map - Traffic Map' Page, press the ALT Mode Softkey.
2) Press one of the following Softkeys:
• Above: Displays Other Non-Threat and Proximity Advisory traffic from
9900 feet above the aircraft to 2700 feet below the aircraft. Typically used
during climb phase of flight.
• Normal: Displays Other Non-Threat and Proximity Advisory traffic from
2700 feet above the aircraft to 2700 feet below the aircraft. Typically used
during enroute phase of flight.
• Below: Displays Other Non-Threat and Proximity Advisory traffic from
2700 feet above the aircraft to 9900 feet below the aircraft. Typically used
during descent phase of flight.
• UNREST (unrestricted): All traffic is displayed from 9900 feet above and
9900 feet below the aircraft.
3) To return to the Traffic Page, select the Back Softkey.
Changing the Display Range on the 'Map - Traffic Map' Page
1) Turn the Joystick.
2) The following range options are available:
• 750 ft (with optional ADS-B)
• 750 ft and 1500 ft (with optional ADS-B)
• 1500 ft and 0.5 nm (with optional ADS-B)
• 0.5 nm and 1 nm (with optional ADS-B)
• 1 nm and 2 nm (with optional ADS-B)
• 2 nm
• 2 and 6 nm
122
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A