Loading An Arrival Into The Active Flight Plan Using The Proc Key; Loading An Arrival Into The Active Flight Plan From The; Wpt - Arrival Information' Page - Garmin G1000 NXi Reference Manual

5) Highlight and remove the departure:
a) Turn the large FMS Knob to highlight the white header of the
departure.
b) Press the CLR Key. The 'Remove <procedure name> from flight plan?'
window is displayed.
Or:
a) Press the MENU Key to display the 'Page Menu' Window and turn the
FMS Knob to highlight 'Remove Departure'.
b) Press the ENT Key. The 'Remove <procedure name> from flight plan?'
window is displayed.
6) With 'OK' highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight 'CANCEL' and press the ENT Key.
7) Press the FMS Knob to remove the flashing cursor.

LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN USING THE PROC KEY

1) Press the PROC Key. The 'Procedures' Window is displayed.
2) Highlight 'Select Arrival'.
3) Press the ENT Key. The 'PROC - Arrival Loading' Page is displayed.
4) Use the FMS Knob to select an airport and press the ENT Key.
5) Select an arrival from the list and press the ENT Key.
6) Select a transition (if required) and press the ENT Key.
7) Select a runway (if required) and press the ENT Key. 'Load?' is highlighted.
8) Press the ENT Key to load the arrival procedure
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN FROM THE 'WPT -
ARRIVAL INFORMATION' PAGE
1) From the 'WPT - Airport Information' Page (first page in the WPT group),
press the STAR Softkey. The 'WPT - Arrival Information' Page is displayed,
defaulting to the airport displayed on the 'WPT - Airport Information' Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter
an identifier/facility name/city, and press the ENT Key.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
85