Garmin G1000 NXi Reference Manual page 147

Symbol
Traffic located on the ground with ADS-B directional information. Arrow points in the
direction of the aircraft track. Ground traffic is only displayed when ADS-B is in Surface
(SURF) Mode or own aircraft is on the ground.
Ground traffic without ADS-B directional information. Ground traffic is only displayed when
ADS-B is in Surface (SURF) Mode or own aircraft is on the ground.
Non-aircraft ground traffic with ADS-B directional information. Pointed end indicates
direction of travel. Ground traffic is only displayed when ADS-B is in Surface (SURF) Mode or
own aircraft is on the ground.
Non-aircraft ground traffic without ADS-B directional information. Ground traffic is only
displayed when ADS-B is in Surface (SURF) Mode or own aircraft is on the ground.
ADS-B Traffic Symbology with GTX 345R Transponder
TAS Symbol
TAS Symbol Description with GTX 33 ES Transponder
Testing the traffic system:
1) Turn the large
2) Turn the small
Joystick
3) Turn the
to be displayed during test.
Standby
4) Press the
Test
5) Press the
190-02178-02 Rev. A
FMS
Knob to select the Map Page Group.
FMS
Knob to select the 'Map - Traffic Map' Page.
to set the range to 2/6 nm to allow for full test pattern
TAS STBY
or
Softkey.
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Description
Description
Non-Threat Traffic
Proximity Advisory (PA)
Traffic Advisory (TA)
Traffic Advisory Off Scale
Softkey.
Hazard Avoidance
121