Entering A Vnv Altitude And Along-Track Offset For The Waypoint; Activating Parallel Track - Garmin G1000 NXi Reference Manual

3) Press the ATK OFS Softkey (MFD only); or press the MENU Key, highlight
'Create ATK Offset Waypoint', and press the ENT Key.
4) Enter a positive or negative offset distance in the range of +/- 1 to 999 nm
(limited by leg distances).
5) Press the ENT Key to create the offset waypoint.
6) Press the FMS Knob to deactivate the flashing cursor.
ENTERING A VNV ALTITUDE AND ALONG-TRACK OFFSET FOR THE
WAYPOINT
1) Press the
¯
2) Turn the large
'ALT').
3) Enter the desired altitude.
ENT
4) Press the
waypoint is an airport without a runway selected, an additional choice is
displayed. Turn the small
ENT
the Key to accept the altitude.
5) The cursor is now flashing in offset distance field.
6) Enter the desired along-track distance before the waypoint.
ENT
7) Press the
ENT
8) Press the

ACTIVATING PARALLEL TRACK

1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the MENU Key, highlight 'Parallel Track', and press the ENT Key. The
'Parallel Track' Window is displayed with the 'Direction' Field highlighted.
3) Turn the small FMS Knob to select 'LEFT' or 'RIGHT' and press the ENT Key.
The 'Distance' Field is highlighted.
4) Turn the small FMS Knob to enter a distance from 1-99 nm and press the
ENT Key. 'Activate Parallel Track' is highlighted.
5) Press the ENT Key to activate parallel track. Press the FMS Knob or the
CLR Key to cancel the parallel track activation.
190-02178-02 Rev. A
Key to display the 'Direct To' Window.
FMS
Knob to place the cursor in the altitude field ('VNV' or
Key to accept the altitude constraint; if the selected
FMS
Knob to choose 'MSL' or 'AGL', and press
Key. 'Activate?' is highlighted.
Key to activate.
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
65