Displaying Wind Data; Setting The Baro Transition Alerts - Garmin G1000 NXi Reference Manual

Flight Instruments

DISPLAYING WIND DATA

1) Press the PFD Opt Softkey.
2) Press the Wind Softkey to display wind data to the left of the HSI.
3) Press one of the numbered Option softkeys to change how wind data is
displayed:
• Option 1: Headwind/tailwind and crosswind arrows with numeric speed
components
• Option 2: Wind direction arrow and speed
• Option 3: Wind direction arrow with numeric direction and speed
4) To remove the window, press the Off Softkey.

SETTING THE BARO TRANSITION ALERTS

FMS
1) Use the
FMS
2) Push the
3) To enable/disable the Baro Transition Alert based on altitude, turn the large
FMS
Knob to highlight the 'On' or 'Off' field for the BARO Transition Alert
Altitude in the BARO Transition Alert Box.
4) If desired, turn the small
Altitude On or Off.
5) Turn the large
FMS
6) Use the
accept or press the
7) Turn the large
Transition Alert Level.
8) If desired, turn the small
Level On or Off.
9) Turn the large
FMS
10) Use the
ENT
Key to accept or press the
selection.
FMS
11) Push the
8
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Knob to select the 'Aux - System Setup 1' Page on the MFD.
Knob to activate the cursor.
FMS
Knob to set the BARO Transition Alert
FMS
Knob to highlight the Altitude field.
Knobs to change the altitude and press the
CLR
Key to return to the previous altitude selection.
FMS
Knob to highlight the 'On' or 'Off' field for the BARO
FMS
Knob to set the BARO Transition Alert Flight
FMS
Knob to highlight the Flight Level field.
Knobs to change the Flight Level for the alert and press the
CLR
Knob to deactivate the cursor.
Key to return to the previous altitude
ENT
Key to
190-02178-02 Rev. A