Garmin G1000 NXi Reference Manual page 231

Message
SVT DISABLED – Out of available
terrain region.
SVT DISABLED – Terrain DB resolution
too low.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
TERRAIN AUD CFG – Trn Awareness
audio config error. Service req'd.
TERRAIN DISABLED – Terrain
Awareness DB resolution too low.
TIMER EXPIRD – Timer has expired.
TRAFFIC FAIL – Traffic device has
failed.
TRN AUD FAIL – Trn Awareness audio
source unavailable
UNABLE V WPT – Can't reach current
vertical waypoint.
VNV – Unavailable. Excessive
crosstrack error.
VNV – Unavailable. Excessive track
angle error.
VNV – Unavailable. Parallel course
selected.
190-02178-02 Rev. A
Comments
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution is not currently
installed.
The MFD and PFD have different software
versions installed. The system should be
serviced.
TAWS is disabled because the audio
configuration is invalid. The system should be
serviced.
TAWS is disabled because a terrain database of
sufficient resolution is not currently installed.
The system notifies the pilot the timer has
expired.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.
Terrain Awareness audio is unavailable. The
system should be serviced.
The current vertical waypoint can not be
reached within the maximum flight path angle
and vertical speed constraints. The system
automatically transitions to the next vertical
waypoint.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
A parallel course has been selected, causing the
vertical deviation to go invalid.
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Annunciations & Alerts
205