Garmin G1000 NXi Reference Manual page 183

Viewing the Connext Setup Page
1) Turn the large FMS Knob on the MFD to select the Aux page group.
2) Turn the small FMS Knob to select the Connext Setup page.
Changing the Bluetooth Name
1) While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to place the cursor in the 'Bluetooth Name' field.
3) Enter the desired name by using the large FMS Knob to select the character
field, and the small FMS Knob select the desired alphanumeric character
for that field.
4) Press the ENT Key. The cursor is removed and the new name is displayed.
Enabling/Disabling Flight Plan Importing from Garmin Pilot
1) While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to place the cursor in the 'Flight Plan Import'
field.
3) Turn the small FMS Knob to select 'Enabled' or 'Disabled'.
4) Press the FMS Knob to remove the cursor.
Enabling/Disabling Automatic Reconnection of a Specific Paired Device
1) While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to highlight the desired paired device.
3) Turn the small FMS Knob to select 'Enabled' or 'Disabled'. Selecting
'Enabled' allows the system to automatically connect to a previously paired
device when detected.
4) Press the FMS Knob to remove the cursor.
Remove a Specific Paired Device from the List of Paired Devices:
1) While viewing the Connext Setup Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to highlight the desired paired device.
3) Press the Remove Softkey. A confirmation screen is displayed.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Additional Features
157