Configuring Automatic Zoom; Panning The Map - Garmin G1000 NXi Reference Manual

Flight Management
4) Press the ENT Key.
5) Highlight the 'North Up Above' Field.
6) Select 'On' or 'Off' using the small FMS Knob.
7) Press the ENT Key to accept the selected option. The flashing cursor
highlights the range field.
8) Use the small FMS Knob to select the desired range.
9) Press the ENT Key to accept the selected option.
10) Press the FMS Knob to return to the 'Map - Navigation Map' Page.

CONFIGURING AUTOMATIC ZOOM

1) Press the MENU Key with the 'Map - Navigation Map' Page displayed. The
cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The 'Map Settings' Menu is displayed.
3) Turn the small FMS Knob to select the 'Map' group.
4) Press the ENT Key.
5) Turn the large FMS Knob to highlight the 'Auto Zoom' On/Off Field, and
select 'Off' or 'On' using the small FMS Knob.
6) Press the ENT Key to accept the selected option. The flashing cursor
highlights the 'Auto Zoom' display selection Field.
7) Select 'MFD', 'PFD', or 'All' using the small FMS Knob.
8) Press the ENT Key to accept the selected option. The flashing cursor
highlights the 'Max Look FWD' Field. Times are from zero to 999 minutes.
9) Use the FMS Knobs to set the time. Press the ENT Key.
10) Repeat step 9 for 'Min Look FWD' (zero to 99 minutes) and 'Time Out' (zero
to 99 minutes).
11) Press the FMS Knob to return to the 'Map - Navigation Map' Page.

PANNING THE MAP

1) Press the Joystick to display the Map Pointer.
2) Move the Joystick to move the Map Pointer around the map.
3) Press the Joystick to remove the Map Pointer and recenter the map on the
aircraft's current position.
40
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A