Garmin G1000 NXi Reference Manual page 149

• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm (available with ADS-B)
Enabling/Disabling Flight ID Display
On the 'Map - Traffic Map' Page, press the FLT ID Softkey.
Enabling/Disabling Traffic Information (MFD Maps Other Than the 'Map
- Traffic Map' Page)
1) Press the Map Opt Softkey.
2) Press the Traffic Softkey. Traffic is now displayed on the map.
Customizing the Traffic Display on the 'Map - Navigation Map' Page
1) Select the 'Map - Navigation Map' Page.
2) Press the MENU Key.
3) With 'Map Settings' highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through the
selections.
• Traffic – Turns the display of traffic data on or off
• Traffic Mode – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/PA - Displays only Traffic Advisories and Proximity Advisories
- TA Only - Displays Traffic Advisories only
• Traffic Symbols – Selects the maximum range at which traffic symbols
are shown
• Traffic Labels – Selects the maximum range at which traffic labels
(relative altitude, vertical trend) are shown with the option to turn off
6) Turn the small FMS Knob to scroll through options (On/Off, range settings,
etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the 'Map - Navigation Map'
Page.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Hazard Avoidance
123