Loading Updated Databases - Garmin G1000 NXi Reference Manual

Level 1 Level 2
SYNC
Info
DP
STAR
APR
WX
NOTAM
Checklist

LOADING UPDATED DATABASES

CAUTION: Never disconnect power to the system when loading a database.
Power interruption during the database loading process could result in
maintenance being required to reboot the system.
NOTE: When loading database updates, the 'DB Mismatch' system mes-
sages will be displayed until database synchronization is complete, followed
by turning system power off, then on. Synchronization can be monitored on
the 'Aux-Database' Page.
Databases may be loaded through Garmin Pilot and Wireless Transceiver. When
loading databases through Garmin Pilot and the Wireless Transceiver, the Wireless
Transceiver must be enabled on the system and the multimedia card inserted in the
bottom SD slot of the MFD.
190-02178-02 Rev. A
Level 3 Level 4
ROT CW
Fit WDTH
Full SCN
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Description
Rotates chart 90 degrees clockwise.
Chart zoom adjusted to fill width of display.
When the annunciator bar is green, full screen mode
is enabled. The annunciator bar is grey when in
split screen mode.
Displays the chart associated with the current phase
of flight.
Returns to the selected airport information chart
(Airport Diagram, Alternate Minimums, Climb/
Descent Table, Diverse Vector Area, Hot Spot, INOP
Components, LAHSO, and Takeoff Minimums).
Displays departure procedure chart.
Displays standard terminal arrival procedure chart.
Displays approach procedure chart.
Displays weather information.
Displays NOTAM information for selected airport,
when available.
When available, displays optional checklists.
Appendix
217