Garmin G1000 NXi Reference Manual page 64

Nav/Com/XPDR/Audio Panel
Assigning An Audio Source To The Bluetooth Device
Press the TEL, MUS1, or MUS2 key until the annunciator turns blue (the audio
from the Bluetooth source will not be heard until this step is complete). The key
annunciator cycles OFF-WHITE-BLUE. WHITE selects the wired audio source. BLUE
selects the Bluetooth audio source. The BLUE source assignment will persist through
Bluetooth audio connection disruptions.
NOTE: The Bluetooth audio can only be assigned to one source at a time.
Once the Bluetooth audio is assigned to an audio source, the remaining
entertainment audio sources will only cycle between OFF and WHITE.
Bluetooth audio will maintain a separate volume level and Blue Select distribution
from the wired audio source. If the Bluetooth connection is supporting a phone call,
all intercom positions listening to that source can also speak on the call through the
headset MICs.
Additional Bluetooth Control Functions
When the Audio Panel detects a recording device as the Bluetooth connected device,
the Pilot ICS Annunciator will turn blue. All audio heard by the Pilot will be recorded.
Press and hold the PILOT ICS Key to enable/disable Bluetooth recording mode.
38
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A