Garmin G1000 NXi Reference Manual page 173

ENT
4) Press the
highlighted.
ENT
5) Press the
Incoming Calls
NOTE: The Push-to-Talk switch is not utilized for telephone communication.
The microphone is active after pressing the Answer Softkey, and stays active
until the call is terminated.
Answering an incoming call in the cockpit:
1) Press the TEL Key on the appropriate audio panel.
2) Press the Answer Softkey on the MFD.
Pressing the Ignore Softkey will extinguish the pop-up window and leave the call
unanswered. Pressing the Phone Softkey will display the 'Aux - Telephone' Page al-
lowing additional call information to be viewed before answering.
Muting incoming call alerts:
1) With the 'Aux - Telephone' Page displayed, press the MENU Key on the
MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Disable Incoming Call Alerts'.
3) Press the ENT Key. The voice and pop-up alert will not be displayed now
when an incoming call is received.
Outgoing Calls
Voice calls can be made from the cockpit to the handset in the cabin, or to an ex-
ternal phone through the Iridium Satellite Network.
Making a call to the cabin:
1) Press the TEL Key on the appropriate audio panel.
2) Press the Dial Softkey on the MFD.
3) Press the ENT Key. The cursor will move from 'Cabin' to 'OK'.
4) Press the ENT Key again. The cabin phone will now ring.
To exit the call, press the Hangup Softkey.
190-02178-02 Rev. A
Key when each field is complete. The
Key to save the changes.
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Additional Features
Save
Button is now
147