Removing An Individual Waypoint From A Stored Flight Plan; Designating A Fly-Over Waypoint - Garmin G1000 NXi Reference Manual

3) Press the CLR Key. The 'Remove XXXXX?' window is displayed.
4) With 'OK' highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight 'CANCEL' and press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor.

REMOVING AN INDIVIDUAL WAYPOINT FROM A STORED FLIGHT PLAN

1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page.
2) Turn the small FMS Knob clockwise one click to display the 'FPL - Flight
Plan Catalog' Page.
3) Press the FMS Knob to activate the cursor and turn the FMS Knob to
highlight the flight plan to be edited.
4) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan' and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
5) Turn the large FMS Knob to highlight the waypoint to be removed.
6) Press the CLR Key. The 'Remove XXXXX?' window is displayed.
7) With 'OK' highlighted, press the ENT Key. To cancel the request, press the
CLR Key, or highlight 'CANCEL' and press the ENT Key.
8) Press the FMS Knob to remove the flashing cursor.

DESIGNATING A FLY-OVER WAYPOINT

1) For the active flight plan, press the FPL Key and press the FMS Knob to activate the
cursor (not required on the PFD).
Or:
For a stored flight plan, highlight the desired flight plan on the 'FPL -
Flight Plan Catalog' Page' and press the Edit Softkey.
2) Highlight the desired waypoint.
3) Press the MENU Key, highlight 'Set Fly-Over Waypoint', and press the ENT
Key. The 'Set <waypoint> to be a fly-over waypoint?' Window is displayed.
190-02178-02 Rev. A Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Flight Management
61