Ads-B Traffic - Garmin G1000 NXi Reference Manual

Hazard Avoidance
Enabling/Disabling Traffic Overlay on PFD Navigation Maps
1) With the Inset Map or HSI Map displayed, press the Map/HSI Softkey on
the PFD.
2) Press the Traffic Softkey to enable/disable the display traffic information.

ADS-B TRAFFIC

WARNING: Do not rely solely upon the display of traffic information for
collision avoidance maneuvering. The traffic display does not provide collision
avoidance resolution advisories and does not under any circumstances or
conditions relieve the pilot's responsibility to see and avoid other aircraft.
WARNING: Do not rely solely upon the display of traffic information to
accurately depict all of the traffic information within range of the aircraft.
Due to lack of equipment, poor signal reception, and/or inaccurate information
from other aircraft, traffic may be present but not represented on the display.
Symbol
Traffic Advisory with directional information. Points in the direction of the intruder
aircraft track.
Traffic Advisory without directional information.
Traffic Advisory out of the selected display range with directional information.
Displayed at outer range ring at proper bearing.
Traffic Advisory out of the selected display range without directional information.
Displayed at outer range ring at proper bearing.
Proximity Advisory with directional information. Points in the direction of the aircraft
track.
124
Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
Description
190-02178-02 Rev. A