Pan Mode; User Waypoints - Garmin GTN 625 Reference Manual

Pan Mode

NOTE: Annunciations for TIS Traffic Coasting or Traffic Removed are not
present while in pan mode. For more information refer to the "TIS Traffic
Status Annunciations" section.
To enter Pan Mode, touch the map anywhere on the Map page. Drag your
finger across the map to move it as desired. In Pan Mode, touch any symbol
on the map to highlight, then touch the information key to display any
available information related to that symbol. Touch the Next key to cycle to
other waypoints close to the cursor.

User Waypoints

Touch any location on the map that is not an existing waypoint to create a
user waypoint. The Waypoint Info key will display, "Create Waypoint" and
will display the "Create User Waypoint" page. See the "Waypoint Info,
Creating a User Waypoint" section.
Next
Key
Back
Key
Touch to create or edit flight plan.
To enter or edit a flight plan, touch the Graphically Edit FPL key. To leave
Pan Mode, touch the Back key.
190-01004-04 Rev. N
Waypoint Info Key
Pan Mode Controls
GTN 625/635/650 Cockpit Reference Guide
Cursor
9