Pan Mode; User Waypoints - Garmin GTN 725 Reference Manual

Pan Mode

NOTE: Annunciations for TIS Traffic Coasting or Traffic Removed are not
present while in pan mode. For more information refer to page 18.
To enter Pan Mode, touch the map anywhere on the Map page. Drag your
finger across the map to move it as desired. In Pan Mode, touch any symbol on
the map to highlight, then touch the information key to display any available
information related to that symbol. Touch the Next key to cycle to other
waypoints close to the cursor.

User Waypoints

Touch any location on the map that is not an existing waypoint to create
a user waypoint. The Waypoint Info key will display, "Create Waypoint"
and will display the "Create User Waypoint" page. See the "Waypoint Info,
Creating a User Waypoint" section.
Touch to
create or
edit flight
plan.
Back Key
To exit Pan Mode, touch the Back key. To enter or edit a flight plan, touch
the Graphically Edit FPL key.
14
Pan Mode Controls
GTN 725/750 Cockpit Reference Guide
Waypoint Info Key
190-01007-04 Rev. K
Cursor
Next Key