About Traffic; Pairing Your Phone - Garmin nuvi 2505 Series Quick Start Manual

If the route you are currently taking is the
only reasonable option, the device might not
calculate a detour.

About Traffic

Garmin is not responsible for the accuracy or
timeliness of the traffic information.
Traffic information may not be available in all
areas or countries. For information about traffic
receivers and coverage areas, go to
.garmin.com/traffic.
A traffic receiver is included in some packages,
built into either the vehicle power cable or the
device, and is an optional accessory for all
models.
• The device must be connected to vehicle
power to receive traffic information.
• The powered traffic receiver and the
device must be in data range of a station
nüvi 2505 Quick Start Manual
WM-Garmin GPS 2505 Manual
Notice
www
Printed on 10/31/13
WM-Garmin GPS 2505 Manual
transmitting traffic data to receive traffic
information.
• You do not need to activate the subscription
included with your traffic receiver.

Pairing Your Phone

Hands-free calling is available on some nüvi
models. Before you can pair, your phone and the
device must be turned on and within 33 ft. (10
m) of each other.
1
Enable the Bluetooth
®
phone.
2
Select Settings > Bluetooth.
3
Select Bluetooth.
4
Select Add Phone > OK.
5
Select your phone, and touch OK.
6
Enter the Bluetooth PIN (1234) for your
device in your phone.
component on your
7
Page 7 of 8
Rev.0