Table of Contents
Advertisement
Avoiding Delays, Tolls, and Areas
Avoiding Traffic Delays on Your Route
Before you can avoid traffic delays, you must be receiving traffic information
Smartphone,
page 33).
By default, the device optimizes your route to avoid traffic delays automatically. If you have disabled this option
in the traffic settings
(Traffic Settings,
1 While navigating a route, select
2 Select Alternate Route, if available.
3 Select Go!.
Avoiding Toll Roads
Your device can avoid routing you through areas that require tolls, such as toll roads, toll bridges, or congestion
areas. The device may still include a toll area in your route if no other reasonable routes are available.
1 Select
> Navigation > Avoidances > Tolls and Fees.
2 Select OK.
Avoiding Road Features
1 Select
> Navigation > Avoidances.
2 Select the road features to avoid on your routes, and select Save.
Avoiding Environmental Zones
Your device can avoid areas with environmental or emissions restrictions that may apply to your vehicle. This
option applies to the vehicle type in the active vehicle profile
1 Select
> Navigation > Environmental Zones.
2 Select an option:
• To be asked each time before routing through an environmental zone, select Always Ask.
• To always avoid environmental zones, select Avoid.
• To always allow environmental zones, select Allow.
3 Select OK.
Custom Avoidances
Custom avoidances allow you to select specific areas or sections of road to avoid. When the device calculates a
route, it avoids these areas and roads unless no other reasonable route is available.
Avoiding a Road
1 Select
> Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid, and select Next.
4 Select the ending point of the road section, and select Next.
5 Select Done.
22
page 45), you can view and avoid traffic delays manually.
> Traffic.
(Vehicle Profiles,
(Receiving Traffic Data Using Your
page 5).
Following a Route
Advertisement
Table of Contents
Troubleshooting
