Installing; Installation Without Mounting Rail - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

Installing

Two installation variants
There are two installation variants:
• With mounting rail
• Without mounting rail
For corresponding conditions, refer to the next chapters.
2.1

Installation without mounting rail

Simple installation
The ET 200eco PN distributed I/O device is designed for easy installation.
• The I/O device must be mounted on a solid base
• and can be prewired.
Requirements
Screw type
Cylinder head screw M5 to ISO 1207/ISO 1580
(DIN 84/DIN85)
Hexagon socket head cap screws M5 to
DIN EN ISO 4762
Tools required
Medium-sized screwdriver or 4 mm hex socket driver.
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
Explanation
The minimum screw length amounts to 35 mm.
Any washers you might need should conform to
DIN 125.
2
21