Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 145

Hide thumbs Also See for SIMATIC Distributed I/O ET 200eco PN:
Table of Contents

Advertisement

I/O device digital inputs/digital outputs
9.3 I/O device digital inputs/digital outputs
Technical data
Bus protocol
Supported Ethernet services
PROFINET interface
Connection socket
Switch function
Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
Reverse polarity protection
Infeed current 1L+
Supply voltage 2L+
Reverse polarity protection
Infeed current 2L+
Current consumption
From supply voltage (1L+)
From supply voltage (2L+)
Power loss of the device
Total current of the outputs
All mounting positions to 60°C
Digital inputs/digital outputs
Number of configurable inputs/outputs
Number of inputs that can be controlled simultan­
eously
Insulation
Insulation test voltage
Ethernet interface
All other circuit elements
Electrical isolation
Between 1L+ and 2L+
146
PROFINET IO
IRT with the option "high flexibility"
IRT with the option "high performance"
PROFINET IO (Device)
ping
arp
LLDP
Network diagnostics (SNMP)
DCP
Prioritized startup
Media redundancy
2 x M12 d-coded
Yes, internal
Yes, if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
Typ. 100 mA (no digital output activated)
Typ. 5 mA (no digital output activated)
type 4.5 W (if all channels are set as digital input)
type 6.5 W (if all channels are set as digital output)
Max. 3.9 A per 1L+ and 2L+
8
8, in all mounting positions
1500 V
(IEEE802.3, Type Test)
rms
707 V DC (type test)
Yes
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN

Advertisement

Table of Contents
loading

Table of Contents