Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 139

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
Technical data
Bus protocol
Supported Ethernet services
PROFINET interface
• Connection socket
• Switch function
• Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
• Reverse polarity protection
• Infeed current 1L+
Supply voltage 2L+
• Reverse polarity protection
• Infeed current 2L+
Total current of the outputs *
• All mounting positions to 60°C
Current consumption
From supply voltage (1L+)
From supply voltage (2L+)
Power loss of the device
Digital outputs
Number of outputs
Insulation
Insulation test voltage
• Ethernet interface
• All other circuit elements
Electrical isolation
• Between 1L+ and 2L+
• Between 1L+, channels and all other circuit ele­
ments
• Between channels
140
PROFINET IO
• IRT with the option "high flexibility"
• IRT with the option "high performance"
PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
2 x M12 d-coded
Yes, internal
Yes, if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
Max. 3.9 A per 1L+ and 2L+
Typ. 100 mA
Typ. 5 mA
Typ. 5.5 W
16
1500 V (IEEE802.3, Type Test)
rms
707 V DC (type test)
Yes
No
No
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN