Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 118

Technical data of the 16 DI DC 24V 8×M12 I/O device
Technical data
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Module-specific data
Transmission rate
Transmission mode
Autonegotiation
Bus protocol
Supported Ethernet services
PROFINET interface
• Connection socket
• Switch function
• Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
• Reverse polarity protection
• Infeed current 1L+
Supply voltage 2L+
• Infeed current 2L+
Current consumption
From supply voltage (1L+)
From supply voltage (2L+)
Power loss of the device
Digital inputs
Number of inputs
Number of inputs that can be controlled simultan­
eously
Insulation
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
I/O device digital inputs/digital outputs
9.1 I/O device digital inputs
60 x 175 x 49
Approx. 910 g
100 Mbps full duplex
100BASE-TX
Yes
PROFINET IO
• IRT with the option "high flexibility"
• IRT with the option "high performance"
PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
2 x M12 d-coded
Yes, internal
Yes, if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes; against destruction
Max. 4 A
DC 24 V
Max. 4 A
Typ. 100 mA
0 mA
6.5 W, typical
16
16 at all mounting positions
119