Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 13

Product overview
1.2 ET 200eco PN Distributed I/O Device
• Interrupts
– Diagnostics interrupts
– Maintenance interrupts
– Hardware interrupts
• Port diagnostics
• Isochronous real-time communication
• Prioritized startup
• Device replacement without programming device
• Media redundancy
Components of ET 200eco PN
The tables below provide an overview of the most important components of ET 200eco PN:
Table 1-1 Components of ET 200eco PN (30 mm)
Component
I/O device
SF/MT LED
①
② BF LED
ON LED
③
DC 24V LED (for digital output device
④
only)
P1 LK LED
⑤
P2 LK LED
⑥
⑦ Channel status/channel fault
14
Function
You connect the sensors and actuators to
the I/O device. The I/O device is available
in the following variants:
• 8 DI DC 24V 4×M12
• 8 DO DC 24V/1,3A 4×M12
• 8 DO DC 24V/0,5A 4×M12
Figure
X03: Voltage infeed
⑧
⑨ X02: Loop through of the voltage
Input/output signal
⑩
MAC address
⑪
X01 P2 R LAN: PROFINET IO connection
⑫
X01 P1 R LAN: PROFINET IO connection
⑬
Operating Instructions, 06/2022, A5E01250250-AN
ET 200eco PN