Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 190

Technical specifications
Weight
Module-specific data
Transmission rate
Transmission mode
Autonegotiation
Bus protocol
Supported Ethernet services
PROFINET interface
• Connection socket
• Switch function
• Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
• Reverse polarity protection
• Infeed current 1L+
Supply voltage 2L+
• Infeed current 2L+
Current consumption
• From supply voltage (1L+)
• From supply voltage (2L+)
Power loss of the device
Analog outputs
Number of outputs
Cable length, shielded
Voltage
• Short-circuit protection
• Short-circuit current
Current
• No-load voltage
Actuator supplies
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
I/O device analog input/analog output
10.2 I/O device analog output
Approx. 930 g
100 Mbps full duplex
100BASE-TX
Yes
PROFINET IO
• IRT with the option "high flexibility"
• IRT with the option "high performance"
PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy
2 x M12 d-coded
Yes, internal
Yes, if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes; against destruction
Max. 4 A
DC 24 V
Max. 4 A
Typ. 280 mA
0 A
Typ. 5.5 W
4
Max. 30 m
Yes, electronic, to ground
Max. 30 mA
Max. 20 V
191