Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual page 202

Technical data
Transmission mode
Autonegotiation
Bus protocol
Supported Ethernet services
PROFINET interface
• Connection socket
• Switch function
• Auto-crossover
Manufacturer ID (Vendor ID)
Device ID (DeviceID)
Voltages and currents
Supply voltage 1L+
• Reverse polarity protection
• Infeed current 1L+
Supply voltage 2L+
• Reverse polarity protection
• Infeed current 2L+
Total current of the outputs
• All mounting positions to 60°C
Current consumption
From supply voltage (1L+)
From supply voltage (2L+)
Power loss of the device
Insulation
Insulation test voltage
• Ethernet interface
• All other circuit elements
Electrical isolation
• Between 1L+ and 2L+
• Between 1L+, channels and all other circuit ele­
ments
• Between channels
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
11.1 IO-Link Master (6ES7148-6JA00-0AB0)
100BASE-TX
Yes
PROFINET IO
• IRT with the option "high flexibility"
PROFINET IO (Device)
• ping
• arp
• LLDP
• Network diagnostics (SNMP)
• DCP
• Prioritized startup
• Media redundancy (as of firmware V7.0)
2 × M12 d-coded
Yes, internal
Yes; if autonegotiation is enabled
002A
H
0306
H
DC 24 V
Yes; against destruction
Max. 4 A
DC 24 V
Yes, against destruction, loads are activated
Max. 4 A
3.9 A
Typ. 200 mA
Typ. 5 mA
Typ. 8 W
1500 V (IEEE802.3, Type Test)
rms
707 V DC (type test)
Yes
No
No
IO-Link Master
203