Parameter Overview Analog Input - Siemens SIMATIC Distributed I/O ET 200eco PN Operating Instructions Manual

10.1.3

Parameter overview analog input

Parameters for analog input 8 AI 4 U/I + 4 RTD/TC 8xM12 (6ES7144-6KD00-0AB0)
Parameters
Group diagnostics
Diagnostics, missing 1L+
Diagnostics, sensor supply
short-circuit
Interference frequency suppres­
sion
Temperature unit
Reference temperature for TC
Measurement type, channels 0
to 3
Measurement type, channels 4
to 7
Measurement range, channels
0 to 3
ET 200eco PN
Operating Instructions, 06/2022, A5E01250250-AN
Range of values
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Off (Fast Mode)
• 60 Hz
• 50 Hz
• 10 Hz
• Celsius
• Fahrenheit
• Kelvin
• -145.0 to 155.0 (Celsius)
• -229.0 to 311.0 (Fahrenheit)
• 128.2 to 428.2 (Kelvin)
• Disabled
• Voltage
• Current (4-wire transducer)
• Current (2-wire transducer)
• Disabled
• Resistance (4-wire connection)
• Resistance (3-wire connection)
• Resistance (2-wire connection)
• Thermoresistor
(linear, 4-conductor connection)
• Thermoresistor
(linear, 3-conductor connection)
• Thermoresistor
(linear, 2-conductor connection)
• Thermocouple elements
• Voltage +/-80 mV
• 1 to 5 V
• 0 to 10 V
• +/-10 V
• 0 to 20 mA
• 4 to 20 mA
• ±20 mA
I/O device analog input/analog output
10.1 I/O device analog input
Default setting Range of effectiveness
Disable Device
Disable Device
Disable Device
50 Hz Device
Celsius Channel groups 4 to 7
0.0 Device
Voltage Channel
Thermoresistor Pt100 Channel
(4-conductor connec­
tion)
±10 V Channel
167